How To Improve Energy Efficiency While Designing A New Home

Published: 12th April 2011
Views: N/A
Ask About This Article Print Republish This Article
When designing a new home, you want to take advantage of the opportunity to make it as energy efficient as possible, thereby saving money as well as have a healthier, comfortable living space. Environmentally sustainable homes are a major factor to think about for new home builders. Sydney homes should be well shaded in order to take a good benefit of the winter sun, and block it out in the summer, and this includes the shading of glass.

Unprotected glass is the major cause of unwanted heat in the home during the summer months, where radiant heat becomes trapped in the confines of your living space. One of the most efficient ways to offer shading is through the use of eaves which are designed to protect your house, including the windows, from the rays of the sun in the hot months, and to let in helpful sun during the cool months.

This can even be achieved in passive heating climates by angling the eaves to allow some low angle winter sun to reach walls, floors and especially house windows. The way that you correctly align your eaves will depend mostly on the climate - in colder altitudes the width of the eaves needs to be reduced to 42 to 43 percent, and also increasing the distance between the window head to the eave. In lower latitudes it might not be effective to vary the width of the ease because of the hot summers.


In order to know about the optimum eaves width for the energy efficiency, there are few specific formulas which could be utilized up based on the climate and even latitude. One means of calculating the required width of the eaves on a ground level home is to multiply the distance from the eaves-line down to the bottom of the window by 0.7. Doing so should keep the glass adequately shaded in the hotter latitudes during the summer months.

A really important aspect for the new home builders is to consider all the possibilities for shading. Sydney home builders often use external sources and also plants, blinds or else louvers, operable clerestory windows, glaze and tinted glass in order to adjust the way sun enters the home. You want your home to work for you, instead of against the climate. If it runs too cold or too hot, it can become expensive to keep your home tolerable.

If your home is sustainable and even very well designed, then it will save your money and even run better. Fixed shading devices like eaves, if properly installed, not just save money, but save a lot of time, energy, care and hassle, making your home a more comfortable, healthy and homely place to live.

Are you searching for professional home builders in Sydney? Planning to build a fabulous house for your family? Then look no further than HarbourCityHomes.com.au. HarbourCityHomes provides modern design work and competitive estimates ensuring an on time, on budget delivery of your project and they are one of the best Sydney builders

This article is free for republishing
Source: http://bobwilliamson.articlealley.com/how-to-improve-energy-efficiency-while-designing-a-new-home-2180737.html


Report this article Ask About This Article Print Republish This Article


Loading...
More to Explore
 


Ask a Professional Online Now
27 Experts are Online. Ask a Question, Get an Answer ASAP.
Type your question here...
Optional:
Select...